is formed from synthetic mixtures for use in fluid flow or organic systems or as insulation or sheathing for electrical or heating forms. The plastic tube is lightweight and adaptable, generally used as flow lines for fluids and gases in pneumatic, hydraulic, method, medical, and many other purposes. Tubing can be elastic or rigid, depending on the element type and its intended purpose.
However, tubing listed in this product area is usually smaller and less rigid than materials organized as hose or pipe. For sourcing larger and harder plastic vessels, refer to the Plastic Pipe product area.
Plastic Materials which are used in formation of plastic tubing:
The most crucial factor in plastic tubing selection is the type of plastic material
. Most of the physical qualities of the tubing will vary with various kinds of plastic:
.Ethyl Vinyl Acetate
Eva is a plastic that manifests high impact energy, superior low-temperature qualities, and excellent stability to grease, oil, and weathering. EVA tubing is an outstanding replacement for types of vinyl tubing used in medical and pharmaceutical applications.
Fluoropolymers Such as PFA and FEP are mixed plastics used in almost every field of industry and technology. They have outstanding temperature stability in a range from -200 to 500°F continuously and are inert to virtually all manufacturing chemicals and solutions. These qualities make them uniquely suited for corrosion protection and high or low-temperature applications.
. Nylon (polyamide)
It is a trademarked synthetic produced by DuPont in the 1930s. It has been admitted as an industry standard for equipment (particularly pneumatic), which requires higher pressure and proper temperature and chemical resistance. Nylon has superior elastic memory and can endure repeated flexing over an extensive period without wear or tube breakage. It also shows high impact resistance down to subfreezing temperatures and low precipitation consumption, diminishing size/dimensional instability.
PE is a lightweight plastic used quickly in food and refreshment, laboratory, and chemical processing devotions due to its high degree of inertness. It is distinctly reasonable compared to most other plastics and can handle a broad kind of application.
PP is the lightest density thermoplastic. It has superior dimensional resistance and electrical qualities as well as excellent exterior hardness and chemical stability. It is reasonable and can be used as a low-cost option for fluoropolymer tubing.
PU is a lighter plastic
that mixes the best features of plastic and rubber. It has excellent elasticity, good chemical and abrasion stability, and superior weathering properties. It can also withstand higher pressures than PVC. Polyurethane has exceptional stability to gasoline, oils, and other petroleum-based chemicals, making it an attractive choice for fuel lines and similar purposes. It is necessary to distinguish between the ester and ether formulations of polyurethane.
The ether version has excellent hydrolytic resistance, while the ester type has slightly higher strength and temperature stability but degrades when constrained to water or humid environments.
. Poly-vinyl chloride
PVC is a plastic with a wide variety of physical features. These combine good chemical and corrosion stability, excellent abrasion and wear resistance, exceptional versatility, and outstanding flow properties. It can be constructed to several levels of hardness, including wire/braid reinforced and rigid pipe. PVC is accessible in different formulations certified for multiple industries and applications such as potable water lines, food and refreshment, chemicals, guarding coverings, and insulation.
Tube performance is typically determined based on some key terms, most of which rely on the element(s) of construction.
Defines at least or maximum pressures the tube is intended to withstand, measured in pounds per square inch. This rating is set for pipes in liquid flow purposes.
defines the maximum vacuum pressure
that can be formed in the tube, most commonly given in inches or millimeters of mercury, referenced below one standard environment.
Minimum bend radius:
is a class based on the adequate amount of deformation the tubing cross-section can support, typically given in inches or millimeters? This is especially necessary for structural purposes where the tubing is subject to loading.
explains the full range of ambient temperatures that the tubing is designed to work within. Operating outside the specified temperature range of the tubing influences its performance and could cause persistent damage or failure.
Benefits of plastic tube &piping:
If tubes and pipes produced from other substances are to be used to convey corrosive materials, they must be treated to resist the permanent presence of such chemicals. This is not the case with synthetic tubing. If a plastic tube needs to be resistant to another substance, then that stability is made to be a part of the tube during production. Thus, the power of a plastic container to corrosive materials is a part of its chemical structure. Therefore, plastic tubing can guarantee more functionality and better outcomes without the extra damage to treatment.
When we crunch the figures, synthetic tubes may not beat steel and stainless steel in the duration of tensile strength. However, things are changed when we start looking at the stock cost. The sum of money required to produce half a dozen pieces of stainless steel tubes for a part of an inclusive production process can create hundreds of elastic and cut-to-size plastic tubes of a similar endurance level for a given purpose.
The stability of plastic depends on the wall depth and resin blend. The power of tubing for a particular purpose has to be propositional to the level of pressure it’s going to be shown to. If plastic tubing is placed within a moving part or used to convey water and oils in a machine, it will obviously be pressed, bumped, crimped, or even pushed from time to time. But even steel, with all its strength, face similar difficulties.
The versatility of plastic is one of its significant characteristics. Plastics tubing can be made for use in various areas linked to steel and stainless steel. Plastic pipe
is the most versatile when it comes to outfitting elaborate machining designs and delicate medical facilities. Plastic tubes can be cut to the estimated or exact length and attached throughout a device with the minimum use of fittings.
Top Plastic Tubes Manufacturers Companies:
Top importers countries:
- New Page Industries, Inc.
- Absolute Custom Extrusions, Inc.
- GSH Industries, Inc.
- Petro Extrusion Technologies, Inc.
- Polytec Plastics, Inc.
Plastic tube market:
The global plastic tubes market has been observing substantial growth since 2012. According to this analysis, the global market for plastic tubes is foreseen to grow at a high CAGR of 5.6% altogether in the 2017-2027 timeline. The global market, in 2017, is valued at around US$ 928
MN and is expected to reach around US$ 1.5
BN by the end of 2027.
The high growth is due to factors such as the establishment of printing and design technology by plastic tube companies enhancing the supply abilities, strong economic forecasts fuelling the consumption of end-use applications of plastic tubes, and several benefits connected with plastic tubes such as ease of use, portability, and convenience.
Read more about plastic products: https://alietc.com/suppliers/rubber-plastics/plastic-products/
Name: Samira H.
Revised Date: 24-08-2020