Fire alarm system:
A fire alarm is an autonomous device or a complete network of devices installed in a building or an area. It gives loud and visible warnings of a breakout of fire in that building or area. It could be automatic, semi-automatic, or manual. Fire alarm systems are necessary for buildings, offices, and some kinds of transports.
Who invented the first fire alarm system?
The first fire alarm system was invented in 1852 by Dr. William F. Channing and Moses Farmer. The system consisted of two fire alarm boxes that each had a short key and a handle. If a fire were caught in a home or business, someone would have to enter inside one of the boxes and crank the handle to convey an alert about the light to a nearby alarm station. An operator at the station would then take the message and inform a fire administration about sending help. As you can see, it was quite a process and needed many steps. The first electric fire alarm system was invented about four decades later in 1890 by Francis Robbins Lipton. He realized that, in many cases, people wouldn't have time to stand around and crank a handle inside a box when a fire started. Therefore, his electric system removed the need for this step.
What does a fire alarm system consist of?
The primary fire alarm system has four main purposes:
• Detect a fire
• Alert residents of the fire condition
• Activate safety control functions
• Alert the local fire station
To cover these purposes a fire alarm system has following components:
• Fire Alarm Control Panel (FACP)
• Primary and Backup Power Supply
• Alarm Initiating Device
• Alarm Notification Device
• Remote Control and Display Panels
• Building Safety Interface.
Fire Alarm Control Panel (FACP): The fire alarm control panel is the control center and the brain of a fire alarm system. The FACP observes and manages the initiating devices and sends the signal to the fire alarm devices if a problem is detected. Each control panel also provides a display that notifies you of the system’s current state.
Primary and Backup Power Supply: A fire alarm system also gives you with access to two power supplies. The primary power supply is permanently used, and the backup power supply is used in the case of a power breakdown.
Alarm Initiating Device: The alarm initiating device is what informs the fire alarm system that there is some danger or fire emergency. These devices can be manual, where someone has to tell the system themselves via a pull or glass station. They can also be automatic by using heat detectors, smoke detectors, or flame detectors.
Alarm Notification Device: The alarm notification device is arguably the most significant part of your fire alarm system, as this is what gets triggered by the initiating device. It makes the exact noises, such as bells, horns, or chimes, when a fire emergency happens.
Remote Control and Display Panels: Remote controls and display panels enable people to control a set of fire alarm systems even when they aren’t close. These have proven to be greatly helpful for big companies.
Building Safety Interface: The building safety interface lets the fire alarm system to control other elements of the building when needed. For example, in the case of a fire emergency, a building safety interface could interact directly with the building’s access control system.
How fire alarm system can save lives?
The first way a fire alarm could save a life is to warn you of the danger of fire. When asleep, the human senses are off. Many people do not detect the smoke or sense the heat of the fire. These devices are also intended to have a piercing alarm that could shake the dead. Humans naturally react to harsh noises. A second way that they can save your life is this: in a big building, you may not be able to notice the signs of a fire on the other side of the building, even if you are conscious. The alarm will tell you that there is a danger, and you will know to leave quickly. A third way is that several fire alarms are made to alert the fire station when there is a fire automatically. This makes it, so the officials will get there faster and have a higher chance of stopping the fire before it turns dangerous.
Due to the proof, fire alarms can save your life. You will be smart to install some in your house, in each room used for sleeping. You never know when a smoke alarm will determine the difference between life or death.
Fire alarm inspection:
You might have a well-functioning system, but there are other factors outside of your actual fire alarm system that should be checked, and this is where the fire alarm inspection comes in.
These are some of the items that will be examined during a fire alarm inspection:
1. There must be no things blocking your fire exits, and that the doors can easily be opened. There should also be a prominent sign on your fire exits so people will know where to go right away.
2. The fire alarm inspection people will also check if there are sufficient exits from the building. They will also confirm if the building does not surpass its maximum occupation. If there are too many people in a building, and there are not enough exits, that will probably lead to rushes during a fire.
3. There must be no highly flammable materials in the proximity of your building. If combustible materials are needed, they must be stored well away from high-risk areas.
4. A fire alarm inspection also includes checking whether fire extinguishers and other fire alarm tools are in the right places where people can instantly get to them in case of a fire.
5. Sprinklers should be placed in areas where the fire is more prone to happen. They should be set partially calculated distances from each other.
Why your business needs a fire alarm system?
When you put your business plan to the existence, risks are always included in making it. One common chance that you have to expect is the firing incident. All your properties will be taken away from you once you become a victim of a fire. Examples of these outcomes are business loss, business splitting, and financial pressures. It is hard to restore your business when you have been a victim of the fire. There is also a high chance that restoring your business can't be done once you are affected by this event. There is a presence of fire because of the failure to defend business fire alarms. This component must be one of the essential elements of your fire security system. In reality, there are lots of business buildings needing these fire elimination systems.
You have to make sure that you will secure the business safety aspect when you set your firm. See to it that fire alarms and fire suppression systems are being in the unit that you will purchase. Once there is a timely discovery of fire, possible dangers will be stopped sooner. There are elements of fire alarms and fire suppression systems that you must check. These are fire blanket, first aid kits, fire extinguishers, and other items needed. I recommend you take the time to visit the website alietc.com and learn more about the changing world of Fire Alarm Systems. If you are looking to purchase a Fire Alarm System, you may also get an immediate price quote.
Revised Date: 14-07-2020